Distinction between Invasive and Non-invasive Remediation

Two important reasons to evaluate the possible influence of mold on your house are the maintenance of your property and the protection of your family from preventable sickness. Many households wait until the mold contamination is severe before they take action. 

Mold infestations that go unchecked may leave a substantial financial burden in their wake, so it’s always better to be safe than sorry.

Dealing with Mold

Indoor air quality can be harmed by toxic mold spores, which can cause breathing difficulties, nausea, and other health concerns. Thankfully, there are two possible ways to remove mold from your house if it is discovered. You will determine the best course of action depending on the pollution level. 

Non-invasive and intrusive cleanup processes are available. In most cases, non-invasive remediation is less time-consuming and requires less post-process rebuilding and repair. As a result, it’s more affordable.

If you require mold removal, you may have to deal with one of two types. Invasive and non-invasive mold eradication are also options. Which one you need depends on the mold issue’s degree and location.

Remediation Through Invasive Methods 

This remediation procedure is part of the removal and disposal of porous building materials that non-invasive ways cannot decontaminate. In most cases, moisture intrusion results in mold growth inside wall cavities. 

You may have a leaky roof or siding or an inside water source like a faucet that’s causing water to seep into your home’s outside envelope. Leaks, seepage, and floods are all significant headaches for any homeowner. 

When these issues arise, the resulting material degradation is severe enough to necessitate invasive treatment. Simply put, the work involved in intrusive remediation is a little more expensive. Still, the subsequent rebuilding and repair significantly push up the cost of this method.

If you require invasive mold treatment in your home, it is most likely because your mold has spread to areas that are difficult to reach without special tools. For example, moisture in your walls might necessitate removing pieces of the wall to eradicate any mold that may be present. Extensive mold removal may also be required if you have mold growing on your roof or siding or if your faucets or pipes have been damaged.

Mold removal services are expensive, but if the mold has infiltrated this far into your house, you must get it taken care of as soon as possible to protect your health.

Remediation through Non-invasive Methods

HEPA vacuuming, sanding, surface cleaning, and HEPA air filtering are the main steps in this cleanup procedure. Surface mold may be removed from a wide variety of construction materials, including wood, glossy painted wood, glass, metal, and ceramic, using this non-invasive method.

Relative humidity (Rh) increases within structures majorly contribute to surface mold growth. Non-invasive remediation is usually your best bet in these situations.

It is best to employ non-invasive mold removal when your mold is easily accessible and produced by high humidity levels in your houses, such as on your walls, window sills, and furniture. Surface wiping, HEPA air filtration, and vacuuming are all non-invasive procedures that are less time-consuming and less expensive. 


There are many ways to clean up contaminated sites. Some methods are more invasive than others. Invasive methods involve digging up and removing contaminated soil or water. 

Non-invasive methods, on the other hand, treat contaminated sites without disturbing the soil or water. 

Invasive methods are usually more expensive and time-consuming than non-invasive methods. They can also be disruptive to the environment and the local community.

In contrast, non-invasive methods are typically less expensive and less disruptive. The best remediation method depends on the site conditions and the type and extent of the contamination. Sometimes a combination of both invasive and non-invasive techniques is used.

Environmental Mold has been a leading full-service indoor air quality and mold consulting firm specialized in indoor air quality inspections / consulting services and expert mold eradication. We offer commercial and residential mold remediation services, property inspections, and repair cost estimates in Orange County. Get in touch with us today!

Leave a Reply

Your email address will not be published. Required fields are marked *